| Customization: | Available |
|---|---|
| Warranty: | One Year From The Date of Bill of Lading |
| Shaping Mode: | Plastic Molding Die |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working environment | temperature 0ºC~45ºC,relative humidity is not more than 90% |
| Cylinder working pressure(bleed pressure) of core-pulling mechanism | 0.5MPa~0.7MPa |
| Vacuum pressure | -0.09Mpa-0.1Mpa |
| Water cycle heating system | water temperature:90ºC~100ºC,pressure≥0.05MPa |
| Mold working temperature | 80ºC~90ºC |
| Diameter of the vacuum hole | generally Φ0.5mm-Φ0.8mm |
| Distribution of vacuum holes | vacuum hole spacing is 30mm-50mm |
| Surface roughness requirements for mold forming | Ra≤0.8mm |
| Mold material | Cast aluminium alloy ZL401 |
| mold wall thickness | ≥15mm |
){kind=link}