| Customization: | Available |
|---|---|
| Warranty: | One Year From The Date of Bill of Lading |
| Shaping Mode: | Plastic Molding Die |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working environment | temperature 0ºC~45ºC,relative humidity is not more than 90% |
| Cylinder working pressure(bleed pressure) of core-pulling mechanism | 0.5MPa~0.7MPa |
| Electric heating system | Voltage 220V or 380V,frequency 50Hz |
| Water cycle heating system | water temperature 50ºC~70ºC,pressure ≥0.05MPa |
| Mold working temperature | 40ºC~60ºC |
| Air holes | diameter is φ3mm~φ4mm, the number is 4 ~6. |
| Mold material | Cast aluminium alloy ZL105,LY12 |
| The mold wall thickness | ≥15mm |
| Gap between mold and product | ≥0.5mm |
){kind=link}